调试3d打印机机器的几个要点
时间:2012-08-08 15:02 来源:未知 作者:admin 点击:次
调试3D打印机机器的几个要点 一,关于xyz的步长(steps/mm): 主要修改文件machines/YourMachine.xml 修改项:根据轮子直径计算运动每毫米需要的steps. 二,关于温度设定 首先选择GCode Generator
然后选择需要打印的文件:
这时会出现文件的图案:
点击上图右下角的Generate GCode 会弹出材料和机器选项:
选择SF40-SM-PLA,而后点击Generate Gcode,进入生成过程:
生成后点击gcode Tab(在褐色的Model的旁边),显现
其开头部分如下: (<alteration>) (<alteration>) (**** beginning of start.txt ****) (This file is for a WeisTek WT1.1 with) (a heated build platform) (**** begin initilization commands ****) M104 S200 T0 (Temperature to 160 celsius) M109 S80 T0 (set heated-build-platform temperature) G21 (Metric FTW) G90 (Absolute Positioning) G92 X0 Y0 Z0 (You are now at 0,0,0) (**** end initilization commands ****) (**** begin homing ****) G1 X-120 Y-120 Z120 F1680.0 G92 Z109.4 ( ---=== Set Z axis maximum ===--- ) G92 X-57 Y-57 (set zero for X and Y) (**** end homing ****) M108 R1.8 (Extruder speed = max) G1 X0 Y-57.0 Z10 F1680.0 (move to waiting position) 该段落是从应用程序目录下replicatorg-0029_r2\skein_engines\skeinforge-40\skeinforge_application\prefs的start.gcode 拷贝而来,可以直接修改调试,或修改start.gcode做保存。修改里面的参数如下 修改文件:start.gcode M104 S200 T0 (Temperature to 200celsius) ---修改挤出头的温度 M109 S80 T0 (set heated-build-platform temperature 80) ---修改热床的温度 三,出料速度 修改文件:start.gcode M108 R1.8 (Extruder speed = 1.8) 四,调整z轴的到X平台的距离 修改文件:start.gcode G92 Z109.4 ( ---=== Set Z axis maximum =109.4==--- ) 五,修改起点中心: G92 X-57 Y-57 (set zero for X and Y) (责任编辑:admin) |
- 上一篇:3d打印机操作常见问题及解答
- 下一篇:3d打印机gen4电子元器件一览表